industrial and mining submersible pumps

Basic Info
·         Model NO.: AH HH
·         Max.Capacity: >400 L/min
·         Impeller Number: Single-Stage Pump
·         Influent Type of Impeller: Single Suction Pump
·         Pump Casing Combined: Verticaljoint Surface Pump
·         Impeller: Closed
·         Transport Package: Wooden Case
·         Max.Head: >150m
·         Driving Type: Motor
·         Working Pressure: Low Pressure Pump
·         Position of Pump Shaft: Horizontal Pump
·         Mounting Height: Suction Centrifugal
·         Usage: Pump, Ash Pumps, Mining
·         Origin: Hebei
·         Product Description
·           Pump Introduction   
 
WA series are cantilevered, horizontal, natural rubber or hard metal lined centrifugal slurry pumps.
They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industry department.
   Typical Applications   
SAG mill discharge, ball mill discharge, Rod mil discharge, Ni acid slurry, coarse sand, coarse tailings, phosphate matrix, minerals concentrate, heavy media, sugar beet, dredging, bottom/fly ash, lime grinding, oil sands, mineral sands, fine tailings, slag granulation, phosphoric acid, coal, flotation, process chemical, pulp and paper, FGD, cyclone feed, etc.
 
·        
       Features       
 
The frame plate for WA series pumps has interchangeable hard metal or pressure moulded elastomer liners. The impellers are made of hard metal or pressure moulded elastomer liners.
The shaft seals for WA series can be packing seal, centrifugal seal or mechanical seal. 
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. There are many drive modes for option, such as V-belt, flexible coupling, gearbox, hydraulic coupler variable frequency, silicon controlled speed, etc. Among them, the flexible shaft coupling drive and V-belt feature of low cost and easy installation. 
 
    Pump Notation    
 
200WA-ST:                         100WAJ-D:
200: Outlet diameter: mm              100: Outlet diameter: mm
WA: Pump type: chrome alloy lined      WAJ: Pump type: rubber lined
ST: Frame plate type                  D: Frame plate type
·        
  Construction Design  


·          
·        
   Pump Part Material  
 
Part Name Material Specification HRC Application OEM Code
Liners & Impeller Metal AB27: 23%-30% chrome white iron ≥56 Used for higher wear condition with pH between 5 and 12 A05
AB15: 14%-18% chrome white iron ≥59 Used for higher wear condition A07
AB29: 27%-29% chrome white iron 43 Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 A49
AB33: 33%-37% chrome white iron   It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. A33
Rubber       R08
      R26
      R33
      R55
Expeller & expeller ring Metal B27: 23%-30% chrome white iron ≥56 Used for higher wear condition with pH between 5 and 12 A05
Grey iron     G01
Stuffing Box Metal AB27: 23%-30% chrome white iron ≥56 Used for higher wear condition with pH between 5 and 12 A05
Grey iron     G01
Frame/Cover plate, bearing house & base Metal Grey iron     G01
Ductile iron     D21
Shaft Metal Carbon steel     E05
Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt Stainless steel 4Cr13     C21
304 SS     C22
316 SS     C23
Joint rings & seals Rubber Butyl     S21
EPDM rubber     S01
Nitrile     S10
Hypalon     S31
Neoprene     S44/S42
Viton     S50
 
·          
DRIVE TYPE

CONTACT US

Address: No.333 Jianshe Road,Qiaoxi District, Xingtai city,Hebei Province,China Cell /whatsapp: +86-0319-5226618 E-mail: admin@cnstarck.com